Once you have connected the clock to the power and local network, you will need to assign it a static IP address.
Note: An IT representative will be able to provide a static IP address for this clock.
- Tap on the three lines, top left of the screen
- Tap System Settings
- Tap Network
- Tap Interface
- If DHCP is on, toggle it off by tapping on the slider to the right.
- Tap IP address
- Enter in the IP Address that has been provided to you by your IT department
- Tap Save
- Change any further fields if necessary
- Tap on the back arrow until to get to the main display.
- Once you have done that, please click here to configure your new G8 Time Clock onto ClockComms Utility.