Adding a Time Clock

Time clocks allow you to connect to a physical or cloud interface to our ClockComms software to retrieve attendance data. This data is crucial to ensuring you are able to manage timesheets efficiently and accurately.

1. Open ClockComms Utility either from the BundyPlus Studio software or wherever you have your ClockComms Shortcut
2. Open Maintenance Centre [CC v8 or under] OR Settings [CC v9+]
   
   • Manual Mode - Click on the corresponding button above
     
   • Repeat Mode - Press Ctrl + M on your Keyboard
3. Click on Time Clocks
4. Click on Add
5. Add the Time Clocks details - Required Fields:
   • Name - Something descriptive like Location/Department etc
   • Model - Depending on what you have purchased
   • Time Zone - Allows for accurate time/daylight saving settings on the Time Clock\
   • Type - Connection type
   • IP Address - Provided by your IT department
6. Check the Enabled checkbox on the top right
7. Click Save
8. Press the Ping button
   If this sends back replies, then you are good to go as the Time Clock is on the network.
9. Click Close Time Clock Settings
10. Click Exit Maintenance Centre

You have now successfully added your Time Clock