Update Daylight Savings/Time Zone for G8/G6 Model Devices

Requirements

• Daylight Savings definitions have been updated. Guide here
• Compatible devices
  • G6 Devices
  • G8 Devices
• Determine your ClockComms Mode. Guide here

This guide is used to pre-configure the G6/G8 devices with daylight savings settings so that they update when daylight savings starts. Depending on how you run ClockComms, you will need to send up to two seperate commands to the device/s. 

Manual mode

1. Open ClockComms Utility
2. Select Set Daylight Savings on the Available Commands panel
3. Click Start
4. Select Set Time and Date on the Available Commands panel
5. Click Start

ClockComms v9.X.X

ClockComms v8.X.X

Automatic (Repeat) mode

1. Open ClockComms Utility
   
2. Press Ctrl + M on your Keyboard
3. Click on Repeat Mode
4. Ensure Set Daylight Savings and Set Time and Date commands are enabled on the Daily Events column.
   • See this guide here for assistance 
5. Click Save

Your time clocks will now adjust their times accordingly when daylight savings starts