Connecting to your Network (Uface E Series)

Network requirements - Confirm with your IT team

• Domain: my.bundyplus.com.au
• Ports: 80, 443, 8080, 8090

Wired/Ethernet

Requirement: Network address details provided by your IT team.

1. Tap the Settings icon at the bottom right
2. Enter your admin password (Default password is 'password')
   
3. Tap Settings
4. Tap Network
5. Tap Ethernet
6. Select your network connection mode:
   1. Auto DHCP This will automatically assign the time clock with an IP Address
   2. Static IP
      • Once this option is selected, network addressing fields will be displayed
      • Enter the network details provided by your IT team (BundyPlus cannot provide these details)
7. Tap Save

Wireless
Requirement: Wifi Password, (Optional) Network address details provided by your IT team.

1. Tap the Settings icon at the bottom right
2. Enter your admin password (Default: password)
   
3. Tap Settings
4. Tap Network
5. Tap WIFI
6. Tap on your WiFi Network
7. Enter your password
8. Tap Connect
   Note: If the password is correct, you will see a green 'Tick' to the right of the Wifi name
9. The device will now be set to Auto DHCP (Automatically receive an IP Address), If a static IP address is to be assigned, please continue to the next step.
10. Tap on your Wifi Name
11. Select Static IP
12. Enter the network details in the fields that display
13. Tap Save