Update Daylight Savings/Time Zone from ClockComms for G8/G6/Uface(If not cloud connected)

IMPORTANT - Please ensure you have updated your ClockComms with daylight savings time zones and definitions. See this guide here

Compatible devices - G8 + G6 Series + Uface(If not cloud connected)

Manual mode - (Click here to determine your ClockComms Mode)
This mode means that you manually select and run commands in ClockComms to interact with your time clock/s.

1. Open ClockComms Utility
2. Click Set Daylight Savings on the Available Commands window on the top left.
3. Click Start
4. Click Set Time and Date on the Available Commands window on the top left
5. Click Start

Now you have set the correct time and date and daylight savings on your Time Clock/s

Automatic (Repeat) mode - (Click here to determine your ClockComms Mode)

1. Open ClockComms Utility
   
2. Two things to confirm:
   • ClockComms is being run in Repeat Mode
   • Repeat Mode is configured to issue both the Set Daylight Savings and Set Time and Date commands to your time clocks
     • Configure these settings via this guide here

Your time clocks will now adjust their times accordingly when daylight savings starts